Sand Density Cone Set
Safety Shoe Shopping Event
Get discounts on all safety shoe up to 20%
Safety_shoe_20
7,500.00৳
- Pick up from the Safestallbd Store
House - 11 (2ndfloor), Road - 16, Sector - 11, Uttara, Dhaka 1230
Free
- Steadfast Courier Delivery
Steadfast courier will deliver to the specified address
Inside Dhaka - (24hours) - 70 TK, Outside Dhaka -(48hours) - 130 TK
- Pathao Courier Delivery
Pathao courier will deliver your products to the specific address
Inside Dhaka - (24hours) - 70 TK, Outside Dhaka - (2-3 Days) - 130 TK
- Sundarban Courier Delivery
Sundarban courier will deliver to the specified address
Inside Dhaka - (24hours) - 80 TK, Outside Dhaka - (48hours) - 150 TK
- Warranty 1 year
- Free 7-Day Returns
Available Payment Methods:
Description :
Sand cone apparatus | 6’’ |
Diameter | 165mm |
Plastic container | 5L |
Base plate | 6.5″ |
Dimension | 300 * 300 * 445mm |
Weight | 1.5kg |
A Sand Density Cone Set is a testing apparatus used in geotechnical engineering and construction to determine the in-place density of compacted soils. It is commonly used for quality control and quality assurance purposes in road construction, embankments, and other civil engineering projects. The test is often referred to as the Sand Replacement Test or the Sand Pouring Density Test.
The set typically includes the following components:
- Sand Density Cone Funnel: This is a metallic funnel with a known aperture at its bottom. It is used to allow a specified volume of sand to flow into a test hole in the ground.
- Sand Density Cone: A metallic cone that fits onto the top of the funnel. It is filled with dry, well-graded sand of known density.
- Base Plate: A metal plate used to level and smooth the surface of the test hole.
- Calibrating Container: A container of known volume used to calibrate the apparatus before the test.
The procedure involves digging a hole in the ground, filling it with the sand from the density cone, and then measuring the volume of the hole and the mass of the sand used. From this data, the in-place density of the soil can be calculated.
The basic steps of the Sand Density Cone Test are as follows:
- Calibrate the apparatus using the calibrating container to ensure accurate results.
- Dig a hole in the ground at the test location.
- Place the base plate at the bottom of the hole.
- Place the sand density cone on top of the hole and fill it with sand.
- Allow the sand to flow into the hole while keeping track of the volume of sand used.
- Measure the mass of the remaining sand in the cone after the test.
- Calculate the in-place density of the soil using the volume of the hole and the mass of the sand.
This test is valuable for assessing the compaction characteristics of soils in the field, ensuring that construction materials meet specified density requirements, and providing data for the design and construction of civil engineering project
Products you may like...
