-8%
HBJ1002G Hydraulic Bottle Jack 10 Ton
3,100.00৳
HLFJ1001 Hydraulic Floor Jack 10 Ton
70,000.00৳
HHCT01240 Hydraulic Crimping Tool Cu16
HHCT01240 Hydraulic Crimping Tool Cu16
Safety Shoe Shopping Event
Get discounts on all safety shoe up to 20%
Safety_shoe_20
6,000.00৳
13
People watching this product now!
- Pick up from the Safestallbd Store
House - 11 (2ndfloor), Road - 16, Sector - 11, Uttara, Dhaka 1230
Free
- Steadfast Courier Delivery
Steadfast courier will deliver to the specified address
2-5 Days
Inside Dhaka - 70 TK, Outside Dhaka - 130 TK
- Pathao Courier Delivery
Pathao courier will deliver your products to the specific address
2-5 Days
Inside Dhaka - 70 TK, Outside Dhaka - 130 TK
- Sundarban Courier Delivery
Sundarban courier will deliver to the specified address
2-5 Days
Inside Dhaka - 80 TK, Outside Dhaka - 150 TK
-
Warranty 1 year
-
Free 7-Day Returns
Available Payment Methods:
Why use HHCT01240 Hydraulic Crimping Tool Cu16?
HHCT01240 Hydraulic Crimping Tool
HHCT01240 Hydraulic Crimping Tool Cu16 tool allows the user to create crimped connections through a hydraulic fluid mechanism to transfer force from the user to the tool.
- Crimping range：Cu 16-240mm2
- Crimping force: 70kN
- Crimping type: hexagon crimping
- Stroke: 18mm
- Length: approx.475mm
- Weight: approx.3.6kg
- Weight of box: approx.1.8kg
- ACCESSORIES –
- Crimping dies: 16,25,35,50,70,95,120,150,185,240mm2
- Sealing O-ring: one set
A joint with insufficient compression will not retain the wire within the terminal with enough force to prevent it from falling out or being pulled out.
With the force of hydraulics, you’re able to get crisp and sharp corners on each crimping job. Hydraulic crimpers are also your best choice for crimping larger, thicker connections. In short, they provide efficiency and power where it’s needed.
Crimp types fall into two basic groups: stab crimps and compression crimps. The cup and tab type crimper is a good example of a stab crimp and features a U shaped crimp point on one jaw and a short, raised projection on the other.
If you are going to try it, use a small flat-head screwdriver to push down the pins into the wires