Century’s Everon Pen is a fine tip fabric marker used in the textile industry & laboratories for shrinkage testing of fabrics. It has a hard aluminum body filled with ink & a rubber valve at the bottom, when pumped slightly pushes ink towards a fine ball point for sharp and fine markings. It is widely used in textile laboratories and mills to check for dimensional stability (shrinkage) of fabrics with a slotted template after washing and processing on fabrics. It is similar to dalo texpen in many parts of the world. It comes with two type of tips plastic (1.5 mm) & stainless steel (1.2 mm). Ink content: 30 ml

Advantages:

Hard Aluminum body to avoid breakage, leakage & puncture.

Easy to use & smooth ink flow due to rubber valve at bottom.

Fine-tip enables the marker to fit inside the slotted templates for shrinkage testing of fabrics.Markings remain permanent even after dyeing, bleaching, washing & other finishing processes.

Works on all fabrics synthetic, cotton, denim, wool, polyester, linen, knitted etc.

Direction of Use:

Remove Cap.

For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip.

Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow.

As pressure reduces, press the rubber valve 2-3 times to continue writing.

Do not press the rubber bulb when not in use as it will lead to increase ink pressure.

Clean the tip & put the cap back on when after each use.

Caution:

Harmful if swallowed or intentional inhalation.

Avoid contact with eyes. Keep away from open flame. Test before use.